passguide hp0-j34 Question: 24
What are the three types of zoning that HP supports on SAN switches?
A. gateway, port, mixed
B. multiple, gateway, port
C. WWN, port, mixed
D. security, WWN, port
Answer: C
Question: 25
In an MSA2000, a vdisk is a group of disk drives configured with a RAID level. What are valid configuration rules for vdisks? (Select two.)
A. Avdisk can contain either SATA or SAS drives, but not both.
B. A RAID 50vdisk is limited to 16 drives.
C. Allvdisks on one controller must be the same RAID level.
D. The maximum capacity of a singlevdisk is 16TB.
E. A RAID 10vdisk can support more drives than a RAID 50 vdisk.
Answer: A, D
Question: 26
What is described as a complete physical copy of a volume within a storage system??
A. RAID
B. backup-to-tape
C. volume copy
D. snapshot
Answer: C
Question: 27
An MSA2000 storage array with two controllers has been placed into the default active-active configuration. A volume has been configured to use write-back cache. Which statements accurately describe this configuration? (Select two.)
A. Fault tolerance for write operations is provided.
B. More read cache is enabled for operations.
C. Both controllers must be operating to perform write operations.
D. Performance may be slightly slower.
E. Both controllers can write to the same disk simultaneously.
Answer: A, D
Question: 28
Customer requirements for a storage array include 20TB of storage space and the ability to attach at least 25 hosts. Which storage array solution meets these requirements at the lowest cost?
A. EVA4400
B. MSA2200sa G2
C. MSA2000fc G2
D. MSA2000i
Answer: C
Question: 29
You are creating vdisks on an MSA2012fc array using the automated creation option. On what is the calculation of the vdisk size based, if there are different size disks in the array?
A. the average size of all disks in the array
B. the largest disk size in the array
C. the average size of the disks in the first enclosure
D. the smallest disk size in the array
Answer: D
Question: 30
When you create a RAID 6 LUN on an MSA2000fc G2 array, how many sets of parity data will be allocated?
A. 6
B. 1
C. 2
D. None. RAID 6 is not supported.
Answer: C
Question: 31
What provides high availability in a storage area network?
A. serverless backup and modular scalability
B. backup concurrency andserverless backup
C. redundant fabrics and traffic rerouting
D. traffic rerouting and backup concurrency
E. modular scalability and redundant fabrics
Answer: C
Question: 32
A single-controller configuration provides no redundancy if the controller fails. You are using this configuration and configuring an MAS2012 array. What is the maximum number of hosts that can be directly attached?
A. 4
B. 8
C. 2
D. 6
Answer: C
Question: 33
When a disk fails in an MSA2000 array, which spare disk type does the system look for first to replace the failed data?
A. dedicated spare
B. default spare
C. dynamic spare
D. global spare
Answer: A
Question: 34
A customer wants to use an existing Fibre Channel -based SAN and has chosen to use dual- ported SAS drive technology. Block-level access is also required. Which HP StorageWorks product best meets this requirement?
A. HPStorageWorks MSA2324fc
B. HPStorageWorks All-in-One 1200
C. HPStorageWorks MSA70
D. HPStorageWorks EVA4400
Answer: A
Question: 35
Several MSA2000 management tools can capture information about the MSA2000 setup. Which data are captured? (Select two.)
A. disk configurations
B. host port configurations
C. switch configurations
D. virtual disk configurations
E. volume configurations
Answer: A, B
Recent Comments