HP0-662
HP Certified Professional
NonStop Configuration and Planning
– Level 1
Exam # HP0-662
Exam Preparation Guide
Exam Preparation Guide: Exam 010-662
NonStop™ Configuration and Planning – Level 1
Check the web site for course descriptions and prerequisites at: http://education.hp.com/curr-nonstop.htm (Instructor-Led Training) http://education.nonstop.compaq.com/us/cat/httoc.htm (Self-Study Training)
You can also call (800) 621-9198 in North America, to speak with one of our education consultants or register for courses.
Or, you can email us at: nonstop.training@hp.com
Exam Status
The NonStop Configuration and Planning – Level 1 exam has completed beta testing
and is now live. This exam is administered by Prometric Regional Service Centers in North America (other locations may have different delivery methods). Refer to the Prometric website: http://www.2test.com
Exams Details
Number of test items: 69
Time allotted to take test: 75 minutes
Passing Score: 70% – 48 items correct
You are not allowed to refer to any books or reference materials during the NonStop
Configuration and Planning – Level 1 exam.
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 1
Audience
This exam is targeted for the following personnel, with a minimum 3-6 months
experience on NonStop S-Series platforms running the G-series NonStop Kernel
Operating System:
• Authorized Service and Support personnel (field support technicians), who perform installations, upgrades, troubleshooting and maintenance tasks.
• Global Customer Support Center (GCSC) personnel, who may have specialized technical expertise in the operating system (e.g., security features, hardware, subsystems) and serve as support for both field support technicians and customers.
• Analyst SEs or Pre-SalesTechnical Support (PSTS) personnel, who perform pre-
sales consulting and technical account support, including tasks such as assessment
of customer needs, system sizing and configuration, installation consulting, and so forth.
• NSK Software Developers, System Integrators and Consultant Partners, Authorized
Service Channel Partners and Distributors, Customers authorized to service their own equipment.
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 2
What You’ll Be Tested On
Exam questions were written to evaluate your knowledge of the following objectives. The percentage of items dedicated to each major category is included in parenthesis.
1) Data Gathering (12%)
1.1 Collect required existing processing environment data from customer site
• Describe tools used to collect data on current customer system
• Identify current operating system levels including firmware and or implemented updates (IPMs)
• Describe the benefits of Express Notice and IPM Scout with relation to software and firmware updates
1.2 Determine specific application requirements, resources, and utilization
• Identify tools and procedures utilized for application specific analysis
• Define the current DSM/SCM environment
• Identify current disk space utilization (DSAP)
• Determine the current system throughput baseline
1.3 Determine current networking environment structure
• Identify the physical architecture of customer network
• Determine current bandwidth, line speeds, and protocols
• Communicate any custom value added network configurations
1.4 Identify specific device types utilized in system
• Describe utilized storage devices (disk and tape)
• Describe utilized terminal types
• Describe utilized printer devices
• Describe utilized encryption devices
1.5 Determine current support structure and relationship with customer
• Identify current hardware support level
• Identify current software support level
• Describe current software licensing structure
1.6 Identify requirements for migrating existing applications
• Determine necessary system resources affected by modified applications
2) Planning (18%)
2.1 Describe the process of designing and developing a valid and workable solution for the customer
• Identify the elements required within a system topology map
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 3
• Describe the key elements of a system proposal
• List the steps involved in executing and developing a project plan
• Describe various methods and resources for validating the technical accuracy of a proposal
2.2 State the required elements of a standard support plan
• Describe the various levels of Service Level Agreements available for customer support
2.3 Describe the typical elements of a standard Request for Proposal (RFP)
2.4 State the purpose of the Tandem Capacity Modeling (TCM) tool
• List the outputs of the TCM tool
• Describe how proposed/updated system should partition drives
2.5 List necessary criteria to insure fault tolerance in proposed system
• Determine appropriate number of CPUs required for solution
• Determine appropriate number of mirrored disks required for solution
• Describe how to design power distribution for fault tolerance
• Determine if customer applications are capable of running NonStop
• Discuss the SCSI interface within a CPU or I/O enclosure
2.6 Describe design goals and baseline improvements of proposed solution
• Determine specific application requirements, resources, and utilization projections
• Determine projected disk space utilization
• Project system throughput baseline improvement
• Determine role of DSM/SCM in proposed environment
2.7 Describe the elements to consider when planning a multiple node solution
• State the design requirements for integrating a supercluster solution
• State the design requirements for implementing an FX2 solution
2.8 Determine the proper number of system consoles and locations to accomplish the proposed solution
2.9 Determine growth trends of a customer system to accommodate future planning (expansion)
• Project system expansion/upgrade elements and timelines
2.10 Discuss proper planning for testing and migrating, porting or upgrading legacy applications
3) Site Preparation and Environment (13%)
3.1 Identify the various elements of a site survey checklist/worksheet
• Discuss the purpose of key site survey checklist/worksheet topics
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 4
3.2 Describe the key requirements necessary to planning and configuring a
NonStop S-Series system
• Discuss the various environmental requirements for site preparation
• Determine if delivery route and destination will accommodate the planned system
• Determine if the physical building setup/flooring construction is adequate for the planned system
• Discuss the power requirements that need to be considered for site preparation
• Discuss the elements of a basic electrical floorplan/blueprint
• Determine country/local electrical codes
• Determine the required number of individual (feeder) branch circuits for the proposed system
• Determine the total amount of power required to run the new system components
• State the purpose of testing the power supply voltages before connecting to new equipment
• Describe the role of the EPO (Emergency Power Off)
• Describe the importance of ESD (electrostatic discharge) protection
• Identify UPS (uninterrupted power supply) requirements
• Identify air conditioning requirements
• Identify air particle limitations
• Define maximum operating temperature and humidity tolerances
• Identify fire system requirements
• Identify geographic/local requirements
• Determine required positioning of system elements and cable lengths
to accommodate proposed system
• Determine the power distribution panel requirements
• Develop system floor plans/layout
• Discuss how to identify the power sources for each enclosure
• State the maximum lengths of system cabling
• Determine the footprint of the equipment and the minimum access requirements
• Identify current layout and usage of incoming/outgoing communication lines
• Discuss the requirement for providing phone lines for remote access
4) Configuration (31%)
4.1 Describe steps in processing an order for a system or product
• Explain the usage and relationship of CPSA and QMS
• Describe the typical output of QMS
• Describe the typical output of CPSA
• Define the sign-off required for order approval
• List the steps necessary for hardware verification
• List the steps necessary for software verification
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 5
4.2 Discuss the initial system configuration elements
• Describe the pre-configured system elements from manufacturing
• Discuss the end-user configured elements that may need to be modified on initial system configuration
• Identify the purpose and usage of processes and subsystems that are initially configured or modified at the customer site
• Explain the relevance of KMSF configuration
• Describe why system processes may need to be modified during system setup
• Discuss the reasons TMF may need to be modified upon initial system configuration
• Discuss the reasons SQL may need to be modified upon initial system configuration
• Discuss the reasons Spooler may need to be modified upon initial system configuration
• Discuss the reasons DSM/TC (tape catalog) may need to be modified upon initial system configuration
• Discuss the reasons SMF may need to be modified upon initial system configuration
4.3 Describe the primary functions of the SCF utility
4.4 Identify the primary tools used during initial system configuration
• Describe the role of DSM/SCM in initial system configuration
• Identify and differentiate the functions performed by the host, target maintenance, and planner interfaces
• List the benefits of using single host multiple target configurations
• List the required software dependencies for running DSM/SCM
• Discuss some of the configurable options within DSM/SCM
• Describe the log files maintained by DSM/SCM
• Describe the role of TSM in initial system configuration
• Discuss the procedure to configure the TSM system consoles for fault tolerance
• Discuss the procedure for setting TSM up to monitor multiple nodes
• Describe ways to connect additional TSM consoles to the system
• List the steps required to activate the TSM event viewer through an
E4SA port (cevstart macro)
• Describe the required steps to change the system topology from Tetra
8 to Tetra 16 on the TSM console
• Describe the purpose of the WanWizard Pro tool
• List the processes that the WanWizard Pro tool can configure
• List the devices that the WanWizard Pro tool can configure
• Discuss the requirements of configuring communication adapters if
WanWizard Pro is not present
• Describe the requirements for configuring E4SA adapters
• Describe the LIF association to the slot layout for CPU and IO enclosures
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 6
Free hp Sample Printable PDF VCE Download: PassGuide offers free demo for HP certification Exams You can check out the interface, question quality and usability of our IT Simulation exams before you decide to buy it. We are the only one site can offer demo for almost all products.• Describe the requirements for the configuration of SWANs and
AWANs
4.5 Identify the necessary elements of a logical network topology
• Identify system adapters
• Identify system protocols
• Identify system cabling
• Identify system naming conventions
• Identify system enclosures
• Identify system consoles
• Identify system peripheral devices
4.6 Describe physical characteristics and limitations
• Describe the configuration differences between Tetra 8 and Tetra 16
topologies
• Determine the appropriate number of SEBs required for a stated number of IO enclosures
• State the maximum number of IO enclosures per single system node
• State the maximum length of the Power On and SAN cables
• Describe the differences between rack mounted, stackable, and non- stackable enclosures
• Describe the differences between commercial and Telco versions of the S-Series server cabinets
• Discuss various disk sizing considerations
• Discuss 9, 18, 36 GB drives vs. 7200 and 10000 RPM performance considerations (throughput)
• Describe disk location and configuration considerations for achieving fault tolerance (internal and external disks)
• Discuss the benefits of enclosure interleaving
• Describe connectivity options for external tape systems
5) Implementation (18%)
5.1 Identify the key elements of project management
5.2 Describe the basic installation procedure (Fast Path Guide)
• Describe the key hardware installation procedures
• Determine all necessary components needed to install the system or upgrade
• Verify the proper group positioning to place equipment (check switches)
• Verify that all peripherals, cables, and connections are correctly installed
• Describe the power sequencing cable installation and power up procedure
• Describe the need for inter-enclosure bonding (earth straps)
• Describe the key initial start system procedures
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 7
• Describe the procedure to follow after initial power on
• Describe the procedure for performing a cold load
• Discuss the different system start configuration options
• Discuss the procedure for verifying that the system topology is correct
• Discuss the STARTCOM and STARTSCF files
• Describe the procedure to Power Off the system
• Discuss the utilities that can be employed for initial system check out
• Describe the methods used to verify all system components are started and/or operational
• Describe how to verify system firmware levels
• Describe the required configuration procedures in the TSM
environment
• Describe the types of passwords that need to be utilized in the TSM
environment (including multiple node log-on capability)
• Describe the procedure for configuring remote setup
• Discuss the role of the Carbon Copy application
• Discuss the requirements for the installation of utilities such as GRT, WanWizard, Sptool
• Describe the initial system attributes that need to be verified/configured
• Discuss key components that may be customized in the system configuration
• Identify the different subsystems, devices, and adapters that need to have their configuration and settings verified
• Describe how to rename and add SCF objects to the configuration file
• Discuss how to configure EXPAND over an IP line in multi-node systems
• List and describe the tools utilized to troubleshoot the system configuration
• Describe trouble isolation steps to localize the problem area
• Describe basic migration and fallback planning/contingencies
• Discuss the critical steps involved to allow for proper fallback
• Identify the milestones and procedures followed for Early Adopter
Program (EAP) testing
• Describe the major considerations of integrating other HP platforms with a NonStop S-Series system
6) Benchmark Validation and Optimization (3%)
6.1 Describe the steps necessary to validate original design (benchmark) goals and projected baseline improvements
• Identify the tools used to determine if additional system configuration optimization is required
• Describe hardware components that may require additional optimization to achieve desired design goals
• Describe software components that may require additional optimization to achieve desired design goals
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 8
7) Migration and Upgrades (5%)
7.1 Describe the issues that need to be considered when migrating or upgrading system elements
• Discuss the issues associated with combining old and new versions of the same products in the same system node or cluster
• Describe the functional differences and limitations between the various models of PMF and enclosure types
• Identify the key areas to monitor when migrating from K-series to S- Series systems
• Identify the key areas to monitor when upgrading from previous versions of the operating system
• Identify the key areas to monitor when upgrading system components
• Discuss oonline rapidshare 4shared links/live system upgrade procedures
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 9
Related Training and Study References
The NonStop Systems Certification includes references to a variety of materials that
provide information included on this certification exam. Completion of courses and review of materials is recommended, but not required, for success on this exam.
Recommended Minimum Courses
Course Title Part Number Type Length
NonStop S-Series Basic Operator Tasks U4165S ILT 3 days
NonStop S-Series Configuration and Change Management U4167S ILT 3 days
DSM/SCM Operations and Management U4150S ILT 4 days
Additional Highly Recommended Courses
Check web site course descriptions for prerequisites
Course Title Part Number Type Length
NonStop Systems Concepts 126267 ISP 16 hours
Basic Guardian Utilities 113496 ISP 4 hours
Basic Operator Tasks for NonStop K-Series 120309 ISP 23 hours
General Subsystem Control Facility (SCF) Operations, NonStop
K-Series
50021 ISP 4 hours
NonStop Transaction Manager/MP Technical Overview 114647 ISP 6 hours
NonStop S-Series Field Support Training U4170S ILT 10 days
ILT = Instructor-Led Training
ISP = Independent Study Program
Check web site course descriptions for prerequisites at: http://education.hp.com/curr-nonstop.htm (Instructor-Led Training) http://education.nonstop.compaq.com/us/cat/httoc.htm (Self-Study Training)
Additional Recommended Reference Materials for This Exam
References to the majority of questions found in this exam can be found in manuals contained in the Oonline rapidshare 4shared links TIM collections. TIM (Total Information Manager) is a single interface to all NonStop Systems documentation and support information.
External users must subscribe to the TIM CD collection. See your NonStop
Representative for more information.
NOTE: TIM must be installed on your system before using the following default access settings.
External: http://tex.tandem.com/cgi-bin/timcfg.exe
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 10
Documentation
• Availability Guide for Problem Management (125509)
• DSM/SCM User’s Guide (422736-001)
• Expand Configuration and Management Manual (425826-001)
• Expand Network Management and Troubleshooting Guide (140765)
• G06.09 Software Installation and Upgrade Guide (426064-001)
• GPA Manual (135081)
• GRTool Reference Guide (See TSM CD and GRT (Guided Replacement Tools) Help Menu
• G-Series Highlights and Migration Planning Guide (426088-001)
• NonStop S-Series FastPath Guide (425760-001)
• Introduction to NonStop Operations Management Manual (125507)
• Kernel-Managed Swap Facility (KMSF) Manual (420260-001)
• LAN Configuration and Management Manual (425686-001)
• Measure Reference Manual (420201-001)
• NonStop SQL/MP Reference Manual (425858-001)
• NonStop S-Series Hardware Installation Guide (424870-001)
• NonStop S-Series Hardware Support Guide (424877-001)
• NonStop S-Series Operations Guide (425761-001)
• NonStop S-Series Planning and Configuration Guide (424861-001)
• NonStop S-Series Server Description Manual (425160-001)
• NonStop S-Series System Expansion and Reduction Guide (424862-001)
• NonStop Storage Management Foundation User’s Guide (424399-001)
• NonStop TMF Configuration and Planning Guide (136588)
• Power Requirements for NonStop Servers (422853-001)
• SCF Reference Manual for G-Series Releases (135084)
• SCF Reference Manual for the Kernel Subsystem (425664-001)
• SCF Reference Manual for the Storage Subsystem (424878-001)
• ServerNet/FX Adapter Configuration and Management Manual (422795-001)
• Support Note: S99071A-G06.06-G06.07 Support Compendium, p. 213 (on TIM)
• Support Note S99056 (on TIM)
• Support Note: S99032 (on TIM)
• Support Note: S97036D-G-Series Support Compendium (on TIM)
• SWAN Concentrator Installation and Support Guide (425645-001)
• TACL Reference Manual (109642)
• Tandem Capacity Model (TCM) Manual (424045-001)
• Tandem Capacity Model (TCM) Manual (424093-001)
• Token Ring Adapter Installation and Support Guide (420094)
• Tandem Performance Data Collector (TPDC) Manual (102910)
• TSM Installer CD (shipped with the system)
• TSM Workstation Installer 9.0 Guide (426779-001)
• TSM Configuration Guide (425150-001)
• TSM Oonline rapidshare 4shared links User Guide (424778-001)
• Viewsys User’s Guide (103491)
The Hp exams leader among the providers of hp0-662 preparatory materials is Pass4sure products such as hp0-662 Braindumps, hp0-662 Study Guides, Tutorial,Torrent, hp0-662 Exam Questions with Answers, hp0-662 Trainings , hp0-662 Oonline rapidshare 4shared links Course and free PDF. It obtained its leadership and trust of the users from the very beginning of its work on the Pass4sure hp0-662 training materials market. All the hp0-662 braindumps aids have been created by people who are personally familiar with hp0-662 exams and who know all the difficulties and popular mistakes made by those who take a hp0-662 test. The entire material is logically composed in such a way that everything becomes easy to understand for anyone. Many hp0-662 guides include audio and video material. It is really easy to acquire Pass4sure hp0-662 exams becausу of great variety of methods of payment.
Recommended Training about Pass4sure HP hp0-662 exam PDF vce
The following courses are the recommended training for hp0-662 exam PDF.
hp hp0-662 Q & A with Explanations
hp hp0-662 Audio Exam
hp hp0-662 study guide
hp hp0-662 Preparation Lab
hp hp0-662 rapidshare 4shared links
hp hp0-662 books
Free down:pass4sure hp0-662
Free down:Pass4sure hp0-662
Exam Preparation Guide: Exam HP0-662 NonStop Configuration and Planning – Level 1 11
http://www.hpexams.com/dumps/exam/HP0-662.rar
| HP Free Downloads |
|
Type |
Exam Bible | New Questions & Answers |
Latest Updated |
Available links |
 |
All HP's Exam Pack |
226 |
1 days ago | Download |
Recent Comments