Free HP0-790 Download | Latest HP HP ASE Certification Dumps

Home > HP ASE > HP0-790

HP0-790

September 16th, 2008 Download Free Latest HP Certification Braindumps Leave a comment Go to comments

HP Certified Professional
ProCurve Routing Switch Essentials v5.21
Exam (HP0-790)
Exam Preparation Guide

Purpose of the Exam Prep Guide

The intent of this guide is to set expectations about the content and the context of the exam and to help candidates prepare for the exam. In
this guide, you will find recommended HP training courses, reference
and study material to assist you in preparing for the exam.

Studies conducted by HP and Prometric show that a combination of course attendance and self-study maximizes the likelihood of passing the exam on the first attempt.

Audience

This exam is for system engineer or networking engineer who have experience designing complex networks. Examples of job roles:

Reseller and customer network specialists, System Engineers, Network Engineers, HP Field System Engineers, HP Services Technical Support and Field Services Engineers

Certification Requirements

The Routing Switch Essentials, HP0-790 is one of the core requirements to be certified as an Accredited System Engineer (ASE) for ProCurve Networking.

The ASE – ProCurve Networking designation provides certification that an individual has the skills to design complex, scalable ProCurve-
based networks and can implement and support complex switched and routing environments. This certification also has a focus on multi-
protocol networks and performance management. Candidates are expected to have knowledge and hands-on experience with the
product to pass this exam.

Prerequisites:

The following requirements are prerequisites for the ASE – ProCurve
Networking Certification.

Rev. 1.00 1 -1

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

 AIS – ProCurve Networking

Exam Details

At the beginning of the exam, you will be asked to answer several survey questions. The survey questions are designed to assist the exam development team in accurately profiling test results and to improve future exams.

The following are details about the exam:

 Number of items: 57

 Item types: multiple choice, drag and drop

 Time commitment: 90 minutes

 Passing Score: 72%

 Reference Material: No on-line or hard copy reference material will be allowed at the testing site.

Comments on the Exam

After the exam has been completed, there is additional 15 minutes allotted for the participant to make specific comments about the test items (i.e., accuracy, appropriateness to audience, etc). HP welcomes these comments as part of our continuous improvement process.

Exam Content

Topics included in this exam are:

• Device configuration and management
• VLANs and IP interfaces
• Enabling port trunking
• Providing redundant links
• Providing redundant default gateways
• Designing and configuring IP networks
• Configuring OSPF
• Defining and applying ACLs

1 -2 Rev. 1.00

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

Student Performance Objectives

After completing Routing Switch Essentials v5.21, students will be able to:

• List the features and benefits of the ProCurve Routing Switch 9300m series

• Describe the management and port modules available for the 9300m

• Explain the components and advan_Etages of the 9300m’s distributed switching architecture

• Explain how the 9300m and other ProCurve switches support ProCurve
Adaptive EDGE Architecture

• Install, configure, and monitor redundant management modules on the 9300m

• Compare the configuration options and commands available on the 9300m and the ProCurve Switch 5300xl series and 3400cl series

• Using the Command Line Interface, configure VLANs and virtual interfaces on the 9300m

• Describe the in-band management methods available on the 9300m

• Using the Command Line Interface, configure system-defined user accounts

• Using the Command Line Interface, configure local user accounts and use them to synchronize authentication methods for the in-band management methods

• Using the Command Line Interface, update 9300m system image files

• Using the Command Line Interface, save, backup, and restore 9300m configuration files

• Use the 9300m Boot Monitor to diagnose and recover from system problems
or failures

• Identify port and slot numbers on the 9300m

• Describe the VLAN functionality of the 9300m

• Compare and contrast the VLAN functionality of the 9300m and the
3400cl/5300xl

• Given a set of customer requirements, configure VLANs and virtual interfaces on the 9300m

• Given a set of customer requirements, define static routes on the 9300m

• Describe the port trunking functionality of the 9300m series

• Compare and contrast the port trunking functionality of the 9300m and the
3400cl/5300xl

• Given a set of customer requirements, configure port trunking on the 9300m

Rev. 1.00 1 -3

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

• Describe the Spanning Tree functionality of the 9300m

• Compare and contrast the Spanning Tree functionality of the 9300m and the
3400cl/5300xl

• Describe the options for configuring the 9300m and the 3400cl/5300xl for interoperable Spanning Tree

• Given a set of customer requirements, configure Spanning Tree on the
9300m and the 3400cl/5300xl

• Describe the 9300m series’ support for default gateway redundancy

• Describe the interaction of VRRP and Spanning Tree

• Compare and contrast VRRP and VRRP Extended (VRRPE)

• Given a set of customer requirements, configure VRRP and VRRPE on the
9300m

• Design a virtual router solution that will enable default gateway redundancy for enterprise clients

• Given a set of customer requirements, design an IP network addressing and routing scheme that uses intelligent edge devices

• Configure virtual, physical, and loopback interfaces on the 9300m

• Given a set of customer requirements, configure, monitor, and troubleshoot
RIP on the 9300m and 3400cl/5300xl

• Given a set of customer requirements, design a route summarization and redistribution scheme

• Given a set of customer requirements, configure, monitor, and troubleshoot
OSPF on the 9300m and the 3400cl/5300xl

• Given a set of customer requirements, define OSPF areas to enable efficient routing topologies

• Given a set of customer requirements, configure redistribution of external routes

• Describe the applications for ACLs on the 9300m and the 3400cl/5300xl

• Compare and contrast the uses and applications for standard and extended
ACLs

• Distinguish between named and numbered ACLs

• Given a set of customer requirements, configure ACLs to effectively filter network traffic on the 9300m

• Monitor and troubleshoot ACL operation on 9300m and the 3400cl/5300xl

1 -4 Rev. 1.00

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

Recommended Training and Study References

This section lists training courses and documents that can help you acquire a majority of the knowledge and skills needed to pass the exam. You must also gain the practical experience outlined in this guide

You are not required to take the courses listed in this section. However, HP strongly recommends that you attend the classes,
participate in class labs, and thoroughly review all course material and documents before taking the exam, even if you believe you have sufficient on-the-job experience.

Instructor-Led Training

Use the information in this guide and the practical experience you have gained to determine your need for the instructor-led training.

Title Course
Number How to Enroll
Adaptive EDGE Fundamentals 15768 www.hp.com/go/procurvetraining

use the regional links to find schedules and registration information
IP Routing
Foundation 24266 www.hp.com/go/procurvetraining

use the regional links to find schedules and registration information
Routing Switch
Essentials v 5.21 or later 23365 www.hp.com/go/procurvetraining

use the regional links to find schedules and registration information

Documentation

Title Section
Title Source/Order Number
Product Manuals http://www.hp.com/rnd/support/manuals/index.htm

Rev. 1.00 1 -5

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

Other Reference Material

Title Order Number Source
FAQs, Manuals, Configuration
Examples, etc. http://www.hp.com/rnd/support/

Preparing for the exam

Here are some recommended steps to prepare for the exam.

1) attend the recommended training courses

2) perform all lab activities

3) make notes about examples that the instructor may have provided

4) read the student and lab guides thoroughly, and ensure that you

• can define/describe relevant technologies

• can describe the importance of the technologies

• understand the possible options available for configuring this product or solution – and know the advantages/disadvantages
of each option

• know HOW to perform each lab activity and know WHY each task is necessary

5) think about how this product or solution would be used in other scenarios

6) become familiar with the typical installation problems, and be able
to perform basic troubleshooting

1 -6 Rev. 1.00

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

Free hp Sample Printable PDF VCE Download: PassGuide offers free demo for HP certification Exams You can check out the interface, question quality and usability of our IT Simulation exams before you decide to buy it. We are the only one site can offer demo for almost all products.

Sample Test Items

The sample test items give you a preview of what the actual test items will look like. It is important to note that these items WILL NOT be on the exam itself. However, they are representative of the actual items, and they should help you become familiar with the format and complexity of the test items. These items
are numbered two ways, sequentially on the left, and by course module number
on the right. After the exam number (790), you will see the course module that the question is related to.

These sample test items are not a check for readiness.

1.) You are installing a second management module on a ProCurve Routing Switch 9300m. Under default settings, which configuration step is necessary to ensure that the firmware images of the two modules are synchronized?

A. You must enter the sync-standby command.
B. The images will automatically be synchronized.
C. You must manually update the firmware on the second module. D. You must reboot the switch using the image on the first module.

2.) What is a difference between the default authentication methods used by the web management interfaces on the ProCurve Routing Switch 9300m and the Switch 5300xl?

A. The 9300m uses different passwords for the web interface and the CLI. The 5300xl uses the same password.
B. The web interface of the 9300m uses the super-user password. The web interface for the 5300xl uses the Privileged EXEC password.
C. The 5300xl uses different passwords for the web interface and the CLI. The 9300m uses the same passwords.
D. The web interface of the 5300xl requires a username and a password. The web interface of the 9300m requires only a password.

3.) What is the procedure for entering the Boot Monitor?

A. Press b on a directly connected terminal while the system is booting.
B. Press Ctrl-b on a directly connected terminal while the system is booting. C. Hold the RESET button on the management module at any time.
D. Enter the command boot mon from the Privileged EXEC level.

Rev. 1.00 1 -7

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

4.) Which ProCurve switch model supports the largest number of port-based
VLANs?
A. 3400cl B. 4100gl C. 5300xl D. 9300m E. 12000m

5.) What is the function of an “uplink port” on the ProCurve Routing Switch
9300m?

A. It is the only port in a port-based VLAN that does not receive broadcast traffic.
B. It is a port that carries all VLANs configured on the switch.
C. It can be used only for switch-to-switch connections.
D. It is the only port in a port-based VLAN that forwards broadcast traffic.

6.) What is a difference between the configuration of the Default VLAN on the
ProCurve Routing Switch 9300m and the Switch 5300xl?

A. At factory defaults, VLAN 1 is the Default VLAN on the 9300m. The ID of the Default VLAN must be configured on the 5300xl.
B. The ID of the Default VLAN must be configured during initial setup of the
9300m. VLAN 1 is the Default VLAN under factory defaults on the 5300xl.
C. The ID of the Default VLAN can be configured on the 9300m. The Default
VLAN is always VLAN 1 on the 5300xl.
D. The Default VLAN is always VLAN 1 on the 9300m. The Default VLAN ID
is configurable on the 5300xl.

1 -8 Rev. 1.00

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

7.) Please refer to the exhibit below to answer this question.

How does the configuration of the ProCurve 9300m Routing Switches affect traffic sent from a host in VLAN 10 to a host in VLAN 40?

A. The traffic will not be forwarded.
B. The traffic will be forwarded with no Layer 2 prioritization information. C. The traffic will be forwarded with a VLAN ID of 1.
D. The traffic will be forwarded only if the hosts have default gateways in
VLAN 1.

Rev. 1.00 1 -9

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

8.) Please refer to the exhibit below to answer this question.

On Router1, which command will ensure that traffic from VLAN 10 is forwarded
to Router2 with the IEEE 802.1Q tag intact?

A. ip route 10.1.0.0/16 10.1.100.2
B. ip route 10.1.0.0/16 10.1.1.2
C. ip route 10.1.100.0/24 10.1.100.2
D. ip route 10.1.10.0/24 10.1.100.2

9.) Module 7 on a ProCurve Routing Switch 9308m contains sixteen ports. Which ports could serve as primary port for a four-port trunk? Select TWO.
A. 7/4
B. 7/5
C. 7/7
D. 7/8
E. 7/9
F. 7/11

1 -10 Rev. 1.00

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

10.) What does this CLI output indicate about the Spanning Tree configuration of
the ProCurve Routing Switch 9300m?
A. The switch is configured for 802.1D. B. The switch is configured for 802.1w.
C. The switch is configured for 802.1s.
D. The switch is configured for PVST+.

11.) How does the output of the show ip rip command differ between the
ProCurve Routing Switch 9300m and the Switch 5300xl?

A. On the 9300m, the output lists all RIP neighbors and the version of their RIP advertisements. On the 5300xl, the output describes all enabled RIP interfaces.
B. On the 9300m, the output displays information about currently configured RIP filters. On the 5300xl, the output shows information about RIP neighbors and advertisements.
C. On the 9300m, the output provides information about the RIP version configured on the 9300m. On the 5300xl, the output lists information about
all routes advertised by RIP neighbors.
D. On the 9300m, the output lists all RIP neighbors and the routes they advertise. On the 5300xl, the output shows the content of the advertisements that the 5300xl sends to its neighbors.

12.) What is a difference between the processes for configuring RIP on the
ProCurve Routing Switch 9300m and the Switch 5300xl?

A. On the 9300m, you must specify a RIP version. On the 5300xl, RIP v2 is enabled by default.
B. On the 9300m, RIP is enabled by default. On the 5300xl, you must enable
RIP in the global configuration context.
C. On the 9300m, you must enable RIP for all router interfaces. On the
5300xl, you must enable RIP only on interfaces with RIP neighbors.
D. On the 9300m, you must enable RIP only in the virtual interface context.
On the 5300xl, you must enable RIP must globally and for specific VLANs.

Rev. 1.00 1 -11

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

13.) What is a difference between the methods used for determining OSPF link
costs on the ProCurve Routing Switch 9300m and the Switch 5300xl?

A. The 9300m learns cost parameters from neighbors. Costs must be configured on the 5300xl.
B. The 9300m supports automatic link cost assignment. Costs must be
configured manually on the 5300xl.
C. The 9300m allows a different cost to be assigned to each interface. On the
5300xl, a single cost is assigned to all routed links.
D. The 9300m automatically bases costs on the speed of the fastest routed link. On the 5300xl, the administrator must specify the fastest link.

14.) The administrator of a ProCurve Routing Switch 9300m enters the following command at the CLI:

9300m(config-ospf-router)#redistribute static

How will a static route configured on the 9300m be displayed in the route tables
of adjacent routers? A. static route
B. default route
C. OSPF route
D. directly

1 -12 Rev. 1.00

Routing Switch Essentials Exam (HP0-790) Exam Preparation Guide

Answers:

1) B.
2) A.
3) A.
4) D.
5) D.
6) C.
7) B.
A.
9) B.E.
10) B.
11) B.
12) A.
13) B.
14) C.

Conclusion

HP wishes you success in the HP Certified Professional Program and
in passing the exam for which you are preparing.

The Hp exams leader among the providers of hp0-790 preparatory materials is Pass4sure products such as hp0-790 Braindumps, hp0-790 Study Guides, Tutorial,Torrent, hp0-790 Exam Questions with Answers, hp0-790 Trainings , hp0-790 Oonline rapidshare 4shared links Course and free PDF. It obtained its leadership and trust of the users from the very beginning of its work on the Pass4sure hp0-790 training materials market. All the hp0-790 braindumps aids have been created by people who are personally familiar with hp0-790 exams and who know all the difficulties and popular mistakes made by those who take a hp0-790 test. The entire material is logically composed in such a way that everything becomes easy to understand for anyone. Many hp0-790 guides include audio and video material. It is really easy to acquire Pass4sure hp0-790 exams becausу of great variety of methods of payment.

Recommended Training about Pass4sure HP hp0-790 exam PDF vce
The following courses are the recommended training for hp0-790 exam PDF.
hp hp0-790 Q & A with Explanations
hp hp0-790 Audio Exam
hp hp0-790 study guide
hp hp0-790 Preparation Lab
hp hp0-790 rapidshare 4shared links
hp hp0-790 books

Free down:pass4sure hp0-790
Free down:Pass4sure hp0-790

Rev. 1.00 1 -13
http://www.hpexams.com/dumps/exam/HP0-790.rar